MS2199HX,MAHLE / CLEVITE MAHLECLEVITE,Crankshaft Main Bearing-宜配网-专业汽配网

t a e

也可拖拽图片到此处自动识别，或在微信/QQ截图后点击此处后Ctrl+V

首页
第三方数据
MAHLE / CLEVITE
MS2199HX

第三方数据MAHLE / CLEVITE : MS2199HX

Crankshaft Main Bearing
MAHLE / CLEVITE : MS2199HX

ALSolid cast aluminum alloy bearings (material designation AL-1) or steel backed bearings with an aluminum alloy lining material designation AL-3, AL-4, AL-5, AL-6). Standard replacement material.: NNarrowed for greater crankshaft fillet clearance.
ASteel backed lead free aluminum silicon alloy bearings without overlay. Standard replacement material.: MSteel backed bearings with a Micro-Babbitt lining (a very thin layer of lining which reduces the microscopic deflections that occur to a bearing when loaded and thus increases fatigue life). Solely intended for extreme high-horsepower applications.
BSteel backed bearings with a conventional babbit lining.: PSteel backed bearings with an intermediate layer of copper-lead alloy and an electroplated lead-tin-copper overlay. Standard replacement material.
CSteel backed bearings with a copper-lead lining.: RIndicates that the bearing can be resized to standard. When following a camshaft bearing, indicates that it has extra bore stock in the inside diameter.
DBearing has dowel hole.: SIndicates a set number designation.
GSteel backed bearings with a matrix of copper and an infiltrant of lead-tin babbitt. Precision undersizes are not resizable.: VHigh performance bearing with a lead-indium overlay (on main sets this indicates partial groove). Solely intended for extreme high-horsepower applications.
HGHigh performance full annular grooved bearing. Perform the same as "A" and "P" bearings, but have the ability to carry more load.: XBearing has .001” more oil clearance than standard.
HHigh performance bearing (on main sets this indicates partial groove). Perform the same as "A" and "P" bearings, but have the ability to carry more load.: VGHigh performance bearing with a lead-indium overlay and a full annular groove. Solely intended for extreme high-horsepower applications.
HTHigh performance with indentless locating lug. “Full Bore” design. Perform the same as "A" and "P" bearings, but have the ability to carry more load.: XXBearing has .002” more oil clearance than standard.
KTriArmor coating applied to the bearing surface, which offers extraordinary protection and lubricity. Enhanced wear characteristics increase bearing life in race engines and high performance street Engines.: WIndicates a part that is a thrust washer (may also be designated upper or lower).

适用车型

ISUZU (2)

SAAB (1)

BUICK (3)

CADILLAC (2)

ESCALADE (4)

5.3L V8 (1)

6.0L V8 (2)

6.0L V8 ELECTRIC/GAS (5)

6.2L V8 (8)

CTS (2)

CHEVROLET (28)

EXPRESS 2500 (3)

4.8L V8 (12)

5.3L V8 (1)

6.0L V8 (11)

EXPRESS 3500 (3)

4.8L V8 (10)

5.3L V8 (3)

6.0L V8 (11)

SILVERADO 1500 (6)

4.8L V8 (9)

5.3L V8 (8)

5.3L V8 ELECTRIC/GAS (2)

6.0L V8 (5)

6.0L V8 ELECTRIC/GAS (2)

6.2L V8 (5)

SILVERADO 1500 CLASSIC (4)

TAHOE (4)

4.8L V8 (5)

5.3L V8 (10)

6.0L V8 ELECTRIC/GAS (6)

6.2L V8 (2)

AVALANCHE (2)

AVALANCHE 1500 (1)

CHEYENNE (1)

COLORADO (1)

EXPRESS 1500 (1)

EXPRESS PASAJEROS (2)

IMPALA (1)

MONTE CARLO (1)

SILVERADO 2500 (2)

SUBURBAN 1500 (2)

5.3L V8 (10)

6.0L V8 (4)

TRAILBLAZER (2)

CAPRICE (1)

CORVETTE (2)

EXPRESS 4500 (1)

EXPRESS CARGO (1)

SILVERADO 2500 CLASSIC (1)

SILVERADO 3500 (1)

SILVERADO 3500 CLASSIC (1)

SSR (1)

SUBURBAN 2500 (1)

TILTMASTER (1)

CAMARO (1)

SS (1)

HUMMER (3)

PONTIAC (3)

GMC (16)

SAVANA 2500 (3)

4.8L V8 (10)

5.3L V8 (1)

6.0L V8 (13)

2005	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

2006	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

2007	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

2008	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

2009	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

2010	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

2012	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

2013	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

2014	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

2015	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

2016	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

2017	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

2018	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

SAVANA 3500 (2)

4.8L V8 (11)

6.0L V8 (14)

2005	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

2006	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

2007	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

2008	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

2009	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

2010	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

2011	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

2012	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

2013	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

2014	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

2015	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

2016	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

2017	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

2018	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

SIERRA 1500 (6)

4.8L V8 (9)

5.3L V8 (9)

5.3L V8 ELECTRIC/GAS (2)

6.0L V8 (5)

6.0L V8 ELECTRIC/GAS (4)

6.2L V8 (5)

SIERRA 1500 CLASSIC (4)

YUKON (5)

4.8L V8 (4)

5.3L V8 (10)

6.0L V8 (2)

6.0L V8 ELECTRIC/GAS (6)

6.2L V8 (7)

CANYON (1)

ENVOY (1)

SAVANA 1500 (1)

YUKON XL 1500 (3)

5.3L V8 (9)

6.0L V8 (5)

6.2L V8 (8)

FORWARD (1)

SAVANA 4500 (1)

SIERRA 2500 (1)

6.0L V8 (14)

2005	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

2006	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

2007	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

2008	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

2009	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

2010	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

2011	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

2012	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

2013	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

2014	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

2015	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

2016	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

2017	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

2018	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

SIERRA 2500 CLASSIC (1)

SIERRA 3500 (1)

6.0L V8 (14)

2005	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

2006	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

2007	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

2008	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

2009	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

2010	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

2011	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

2012	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

2013	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

2014	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

2015	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

2016	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

2017	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

2018	High Performance; Set; H Series (Tri-Metal) X; .001 IN Extra Oil Clearance (Size: Standard) MS2199HX

SIERRA 3500 CLASSIC (1)

YUKON XL 2500 (1)

WORKHORSE (2)

OE号码

品牌	号码
OE	MS-2199H*

按品牌拼音首字母查找：

尺寸/参数

标注	名称	尺寸范围	单位

标注实例

联系客服

客服电话：020-36390347

第三方数据MAHLE / CLEVITE : MS2199HX

Crankshaft Main Bearing
MAHLE / CLEVITE : MS2199HX

适用车型

OE号码

新手指南

供应商服务

宜配服务

帮助

尺寸/参数

标注实例

第三方数据MAHLE / CLEVITE : MS2199HX

Crankshaft Main Bearing MAHLE / CLEVITE : MS2199HX

适用车型

OE号码

新手指南

供应商服务

宜配服务

帮助

尺寸/参数

标注实例

Crankshaft Main Bearing
MAHLE / CLEVITE : MS2199HX