MOOG : K5273 |
Ball Joint |
- Adjustable: No ;
- Castle Nut Included: Yes ;
- Cotter Pin Hole: Yes ;
- Greasable: Yes ;
- Material: Neoprene ;
- Mounting Hole Quantity: 3 ;
- Mounting Type: Bolt-on ;
|
MOOG : K6527 |
Ball Joint |
- Adjustable: No ;
- Cotter Pin Hole: Yes ;
- Material: Neoprene ;
- Mounting Hardware Included: Yes ;
- Mounting Hole Quantity: 3 ;
- Mounting Type: Bolt-on ;
- Suspension Grade Type: Standard ;
|
MOOG : K5331 |
Ball Joint |
- Adjustable: No ;
- Cotter Pin Hole: Yes ;
- Material: Neoprene ;
- Mounting Hardware Included: Yes ;
- Mounting Hole Quantity: 3 ;
- Mounting Type: Bolt-on ;
- Suspension Grade Type: Standard ;
|
MOOG : K5333 |
Ball Joint |
- Adjustable: No ;
- Cotter Pin Hole: Yes ;
- Material: Neoprene ;
- Mounting Hardware Included: Yes ;
- Mounting Hole Quantity: 3 ;
- Mounting Type: Bolt-on ;
- Suspension Grade Type: Standard ;
|
ACDELCO : 45D2102 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Castle Nut Included: Yes ;
- Cotter Pin Hole: Yes ;
- Dust Boot Included: Yes ;
- Greaseable: Yes ;
- Material: Steel ;
- Mounting Type: Bolt On ;
- Stud Type: Threaded ;
- Type: Bolt On ;
|
ACDELCO : 45D2244 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Castle Nut Included: Yes ;
- Cotter Pin Hole: Yes ;
- Dust Boot Included: Yes ;
- Greaseable: Yes ;
- Material: Steel ;
- Mounting Type: Bolt On ;
- Stud Type: Threaded ;
- Type: Bolt On ;
|
ACDELCO : 45D2259 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Castle Nut Included: Yes ;
- Cotter Pin Hole: Yes ;
- Dust Boot Included: Yes ;
- Greaseable: Yes ;
- Height (IN): 3.59 ;
- Length (IN): 5.44 ;
- Material: Steel ;
- Mounting Type: Bolt On ;
- Stud Type: Threaded ;
- Type: Bolt On ;
- Weight (lb): 1.8 ;
- Width (IN): 4.88 ;
|
MOOG : K6537 |
Ball Joint |
- Adjustable: No ;
- Cotter Pin Hole: Yes ;
- Material: Neoprene ;
- Maximum Outside Diameter: 2.180 in ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Press-in ;
- Suspension Grade Type: Standard ;
|
ACDELCO : 45D2286 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Castle Nut Included: Yes ;
- Cotter Pin Hole: No ;
- Dust Boot Included: Yes ;
- Greaseable: No ;
- Height (IN): 3.3 ;
- Length (IN): 5.3 ;
- Material: Steel ;
- Mounting Type: Press In ;
- Stud Type: Threaded ;
- Type: Press In ;
- Weight (lb): 1.5 ;
- Width (IN): 4 ;
|
ACDELCO : 45D2339 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Castle Nut Included: Yes ;
- Cotter Pin Hole: No ;
- Dust Boot Included: Yes ;
- Greaseable: No ;
- Material: Steel ;
- Mounting Type: Press In ;
- Stud Type: Threaded ;
- Type: Press In ;
|
ACDELCO : 45D2324 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Castle Nut Included: Yes ;
- Cotter Pin Hole: Yes ;
- Dust Boot Included: Yes ;
- Greaseable: Yes ;
- Material: Steel ;
- Mounting Type: Bolt On ;
- Stud Type: Threaded ;
- Type: Bolt On ;
|
MOOG : K6701 |
Ball Joint |
- Adjustable: No ;
- Castle Nut Included: Yes ;
- Cotter Pin Hole: Yes ;
- Greasable: Yes ;
- Material: Neoprene ;
- Mounting Hole Quantity: 3 ;
- Mounting Type: Bolt-on ;
|
ACDELCO : 45D2327 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Castle Nut Included: Yes ;
- Cotter Pin Hole: Yes ;
- Dust Boot Included: Yes ;
- Greaseable: Yes ;
- Height (IN): 3.59 ;
- Length (IN): 5.44 ;
- Material: Steel ;
- Mounting Type: Bolt On ;
- Stud Type: Threaded ;
- Type: Bolt On ;
- Weight (lb): 1.68 ;
- Width (IN): 4.88 ;
|
ACDELCO : 45D2340 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Castle Nut Included: Yes ;
- Cotter Pin Hole: No ;
- Dust Boot Included: Yes ;
- Greaseable: No ;
- Height (IN): 1.78 ;
- Length (IN): 6.12 ;
- Material: Steel ;
- Mounting Type: Bolt On ;
- Stud Type: Threaded ;
- Type: Bolt On ;
- Weight (lb): 0.1 ;
- Width (IN): 3.28 ;
|
MEVOTECH : MK6701 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Dust Boot Included: Yes ;
- Grease Fitting Included: Yes ;
- Greaseable: Yes ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Bolt-in ;
- Pre-Greased: Yes ;
|
MEVOTECH : MK5273 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Bearing Type: Sintered Metal ;
- Castle Nut Included: Yes ;
- Cotter Pin Included: Yes ;
- Dust Boot Included: Yes ;
- Grease Fitting Included: Yes ;
- Greaseable: Yes ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Bolt-in ;
- Pre-Greased: Yes ;
- Stud Type: Threaded ;
|
MEVOTECH : MK5333 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Castle Nut Included: Yes ;
- Cotter Pin Included: Yes ;
- Dust Boot Included: Yes ;
- Grease Fitting Included: Yes ;
- Greaseable: Yes ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Bolt-in ;
- Pre-Greased: Yes ;
- Stud Type: Threaded ;
|
MEVOTECH : MK6527 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Dust Boot Included: Yes ;
- Grease Fitting Included: Yes ;
- Greaseable: Yes ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Bolt-in ;
- Pre-Greased: Yes ;
|
MEVOTECH : MK5331 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Bearing Type: Sintered Metal ;
- Castle Nut Included: Yes ;
- Cotter Pin Included: Yes ;
- Dust Boot Included: Yes ;
- Grease Fitting Included: Yes ;
- Greaseable: Yes ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Bolt-in ;
- Pre-Greased: Yes ;
- Stud Type: Threaded ;
|
MOOG : K80567 |
Ball Joint |
- Adjustable: No ;
- Cotter Pin Hole: No ;
- Material: Neoprene ;
- Mounting Hardware Included: No ;
- Mounting Hole Quantity: 3 ;
- Mounting Type: Bolt-on ;
- Suspension Grade Type: Standard ;
|
MOOG : K80566 |
Ball Joint |
- Adjustable: No ;
- Cotter Pin Hole: No ;
- Material: Neoprene ;
- Mounting Hardware Included: No ;
- Mounting Hole Quantity: 3 ;
- Mounting Type: Bolt-on ;
- Suspension Grade Type: Standard ;
|
BECK/ARNLEY : 1015320 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Stud Type: Threaded ;
- Boot Material: Synthetic Rubber ;
- Finish: Corrosion Resistant ;
|
MEVOTECH : MK80595 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Castle Nut Included: Yes ;
- Cotter Pin Included: Yes ;
- Dust Boot Included: Yes ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Bolt-in ;
- Stud Type: Threaded ;
|
MEVOTECH : MS50505 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Bearing Type: Sintered Metal ;
- Dust Boot Included: Yes ;
- Grease Fitting Included: Yes ;
- Greaseable: Yes ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Bolt-in ;
- Pre-Greased: Yes ;
- Stud Type: Threaded ;
|
MOOG : K500034 |
Ball Joint |
- Adjustable: No ;
- Cotter Pin Hole: No ;
- Material: Neoprene ;
- Mounting Hardware Included: Yes ;
- Mounting Hole Quantity: 2 ;
- Mounting Type: Bolt-on ;
- Suspension Grade Type: Standard ;
|
MOOG : K80305 |
Ball Joint |
- Adjustable: No ;
- Cotter Pin Hole: Yes ;
- Material: Neoprene ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Press-in ;
- Suspension Grade Type: Standard ;
|
MEVOTECH : MS50510 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Bearing Type: Sintered Metal ;
- Dust Boot Included: Yes ;
- Grease Fitting Included: Yes ;
- Greaseable: Yes ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Bolt-in ;
- Pre-Greased: Yes ;
- Stud Type: Grooved ;
|
DELPHI : TC1501 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Bushings Included: No ;
- Castle Nut Included: Yes ;
- Color: Gray ;
- Cotter Pin Hole: Yes ;
- Cotter Pin Included: Yes ;
- Dust Boot: Yes ;
- Dust Boot Material: Choloroprene Rubber (CR) ;
- Grease Fitting Included: Yes ;
- Height (IN): 3.472 ;
- Height (MM): 88.2 ;
- Length (MM): 54 ;
- Material: Steel ;
- Maximum Outside Diameter (IN): 2.126 ;
- Maximum Outside Diameter (MM): 54.0 ;
- Mount Plate Included: No ;
- Mounting Hardware Included: No ;
- Nuts Included: Yes ;
- Position(s): Front Lower ;
- Stud Tapered End 1 Diameter (in): 0.717 ;
- Stud Tapered End 1 Diameter (mm): 18.2 ;
- Stud Tapered End 2 Diameter (in): 0.827 ;
- Stud Tapered End 2 Diameter (mm): 21.0 ;
- Stud Thread Diameter (IN): 0.625 ;
- Stud Thread Diameter (MM): 15.875 ;
- Stud Thread Length (IN): 0.941 ;
- Stud Thread Length (MM): 23.9 ;
- Stud Thread Pitch (mm): 0.7 ;
- Stud Threads Per Inch: 18 ;
- Stud Type: Threaded ;
- Suspension Grade Type: Standard ;
- Tapered Stud: Yes ;
- Washers Included: No ;
- Width (MM): 54.0 ;
|
DELPHI : TC1779 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Bushings Included: No ;
- Castle Nut Included: No ;
- Color: Black ;
- Cotter Pin Included: No ;
- Distance Between Mounting Holes (MM): 55.9 ;
- Dust Boot: Yes ;
- Dust Boot Material: Choloroprene Rubber (CR) ;
- Greasable: Yes ;
- Grease Fitting Included: No ;
- Material: Steel ;
- Mount Plate Included: No ;
- Mounting Bolt Length (IN): 1.18 ;
- Mounting Bolt Shank Diameter (IN): 0.47 ;
- Mounting Bolt Thread Pitch (MM): 1.25 ;
- Mounting Bolts Included: Yes ;
- Mounting Hardware Included: Yes ;
- Mounting Hole Quantity: 3 ;
- Mounting Type: Bolt In ;
- Nuts Included: Yes ;
- Position(s): Front Lower ;
- Stud Tapered End 1 Diameter (in): 0.594 ;
- Stud Tapered End 1 Diameter (mm): 15.1 ;
- Stud Tapered End 2 Diameter (in): 0.713 ;
- Stud Tapered End 2 Diameter (mm): 18.1 ;
- Stud Thread Diameter (IN): 0.55 ;
- Stud Thread Diameter (MM): 14.0 ;
- Stud Thread Pitch (mm): 1.5 ;
- Stud Type: Threaded ;
- Suspension Grade Type: Standard ;
- Tapered Stud: Yes ;
- Washers Included: Yes ;
- Wrench Size (mm): 5.0 ;
|
MEVOTECH : MK80612 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Dust Boot Included: Yes ;
- Grease Fitting Included: Yes ;
- Greaseable: Yes ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Press-in ;
- Pre-Greased: Yes ;
- Stud Type: Threaded ;
|
ACDELCO : 45D2403 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Castle Nut Included: No ;
- Cotter Pin Hole: No ;
- Dust Boot Included: Yes ;
- Greaseable: No ;
- Height (IN): 3.59 ;
- Length (IN): 5.44 ;
- Material: Steel ;
- Mounting Type: Bolt On ;
- Stud Type: Grooved ;
- Type: Bolt On ;
- Weight (lb): 2 ;
- Width (IN): 4.88 ;
|
MOOG : K500174 |
Ball Joint |
- Adjustable: No ;
- Cotter Pin Hole: Yes ;
- Material: Neoprene ;
- Mounting Hardware Included: Yes ;
- Mounting Hole Quantity: 2 ;
- Mounting Type: Bolt-on ;
- Suspension Grade Type: Standard ;
|
MOOG : K500175 |
Ball Joint |
- Adjustable: No ;
- Cotter Pin Hole: Yes ;
- Material: Neoprene ;
- Mounting Hardware Included: Yes ;
- Mounting Hole Quantity: 2 ;
- Mounting Type: Bolt-on ;
- Suspension Grade Type: Standard ;
|
ULTRA-POWER : K5331 |
Ball Joint |
|
ULTRA-POWER : K5273 |
Ball Joint |
|
MEVOTECH : GK5273 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Dust Boot Included: Yes ;
- Mounting Type: Bolt-in ;
|
MEVOTECH : GK5331 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Dust Boot Included: Yes ;
- Mounting Type: Bolt-in ;
|
MEVOTECH : GK5333 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Dust Boot Included: Yes ;
- Mounting Type: Bolt-in ;
|
MEVOTECH : GK6527 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Dust Boot Included: Yes ;
- Mounting Type: Bolt-in ;
|
MEVOTECH : GK6701 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Dust Boot Included: Yes ;
- Mounting Type: Bolt-in ;
|
MEVOTECH : GS50505 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Dust Boot Included: Yes ;
- Mounting Type: Bolt-in ;
|
ACDELCO : 45D1505 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Castle Nut Included: Yes ;
- Cotter Pin Hole: Yes ;
- Dust Boot Included: Yes ;
- Greaseable: Yes ;
- Height (IN): 3.3 ;
- Length (IN): 5.3 ;
- Material: Steel ;
- Mounting Type: Bolt On ;
- Stud Type: Threaded ;
- Type: Bolt On ;
- Weight (lb): 1.75 ;
- Width (IN): 4 ;
|
QUICK STEER : K500034 |
Ball Joint |
|
QUICK STEER : K5273 |
Ball Joint |
|
QUICK STEER : K5331 |
Ball Joint |
|
QUICK STEER : K5333 |
Ball Joint |
|
QUICK STEER : K6527 |
Ball Joint |
|
QUICK STEER : K80567 |
Ball Joint |
|
ULTRA-POWER : K5333 |
Ball Joint |
|
ULTRA-POWER : K6701 |
Ball Joint |
|
QUICK STEER : K80566 |
Ball Joint |
|
QUICK STEER : K80595 |
Ball Joint |
|
MEVOTECH : GK80595 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Dust Boot Included: Yes ;
- Mounting Type: Bolt-in ;
|
MEVOTECH : GK80612 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Dust Boot Included: Yes ;
- Mounting Type: Press-in ;
- Stud Type: Threaded ;
|
MEVOTECH : GS50510 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Dust Boot Included: Yes ;
- Mounting Type: Bolt-in ;
- Stud Type: Grooved ;
|
BECK/ARNLEY : 1017808 |
Ball Joint |
|
CENTRIC : 61162017 |
Ball Joint |
|
CENTRIC : 61162019 |
Ball Joint |
|
CENTRIC : 61162020 |
Ball Joint |
|
CENTRIC : 61162022 |
Ball Joint |
|
ULTRA-POWER : K6537 |
Ball Joint |
|
DORMAN : BJ91035XL |
Ball Joint |
- Adjustable: No ;
- Attachment Type: Taper ;
- Ball Joint Assembly: Yes ;
- Ball Joint Installed: Yes ;
- Bearing Material: Polymer ;
- Bolts/Studs Included: Yes ;
- Bushing Included: No ;
- Bushings Included: No ;
- Castle Nut Included: Yes ;
- Color: Grey ;
- Cotter Pin Hole: Yes ;
- Cotter Pin Included: No ;
- Dust Boot Included: Yes ;
- Dust Boot Material: Polychloroprene ;
- Grease Fitting Included: No ;
- Greaseable: No ;
- Height (MM): 85.03 ;
- Housing Press Fit Diameter: 45 mm ;
- Length (MM): 111 ;
- Material: Steel ;
- Maximum Outside Diameter (MM): 61 ;
- Mount Plate Included: No ;
- Mounting Bolts Included: No ;
- Mounting Hardware Included: Yes ;
- Mounting Hole Quantity: 3 ;
- Mounting Type: Bolt On ;
- Nuts Included: Yes ;
- Package Contents: 1 Ball Joint; 1 Castle Nut; 1 Cotter Pin; 3 Nuts; 3 Bolts ;
- Stud Taper Per Foot (IN): 2 ;
- Stud Tapered End 1 Diameter (mm): 27.2 ;
- Stud Tapered End 2 Diameter (mm): 22 ;
- Stud Thread Diameter (MM): 12 ;
- Stud Thread Length (MM): 35.5 ;
- Stud Thread Pitch (mm): 1.5 ;
- Stud Type: Taper ;
- Suspension Grade Type: Premium ;
- Tapered Stud: Yes ;
- Thread Pitch: M1.75 ;
- Type: Threaded ;
- Washers Included: No ;
- Width (MM): 59 ;
- Wrench Size (mm): 12 ;
|
DORMAN : BJ92105XL |
Ball Joint |
- Adjustable: No ;
- Attachment Type: Bolt-on ;
- Ball Joint Assembly: Yes ;
- Ball Joint Installed: Yes ;
- Bearing Material: Polymer ;
- Bolts/Studs Included: No ;
- Bushing Included: No ;
- Bushings Included: No ;
- Castle Nut Included: Yes ;
- Color: Grey ;
- Cotter Pin Hole: Yes ;
- Cotter Pin Included: No ;
- Dust Boot Included: Yes ;
- Dust Boot Material: Polychloroprene ;
- Grease Fitting Included: No ;
- Greaseable: No ;
- Height (MM): 85.03 ;
- Housing Press Fit Diameter: 45 mm ;
- Length (MM): 111 ;
- Material: Steel ;
- Maximum Outside Diameter (MM): 61 ;
- Mount Plate Included: No ;
- Mounting Bolts Included: No ;
- Mounting Hardware Included: Yes ;
- Mounting Hole Quantity: 3 ;
- Mounting Type: Bolt On ;
- Nuts Included: Yes ;
- Package Contents: 1 Ball Joint; 1 Castle Nut; 1 Cotter Pin; 3 Bolts; 3 Nuts ;
- Stud Taper Per Foot (IN): 2 ;
- Stud Tapered End 1 Diameter (mm): 27.2 ;
- Stud Tapered End 2 Diameter (mm): 22 ;
- Stud Thread Diameter (MM): 12 ;
- Stud Thread Length (MM): 35.5 ;
- Stud Thread Pitch (mm): 1.5 ;
- Stud Type: Tapered ;
- Suspension Grade Type: Premium ;
- Tapered Stud: Yes ;
- Thread Pitch: M1.75 ;
- Type: Threaded ;
- Washers Included: No ;
- Width (MM): 59 ;
- Wrench Size (mm): 12 ;
|
MEVOTECH : MS50521 |
Ball Joint |
- Adjustable: No ;
- Castle Nut Included: Yes ;
- Cotter Pin Included: Yes ;
- Dust Boot Included: Yes ;
- Dust Boot Material: Rubber ;
- Grease Fitting Included: Yes ;
- Greaseable: Yes ;
- Mounting Hole Quantity: 3 ;
- Mounting Type: Bolt-in ;
- Pre-Greased: Yes ;
- Stud Type: Threaded ;
|
ULTRA-POWER : K80305 |
Ball Joint |
|
SKP : SK500034 |
Ball Joint |
|
SKP : SK5273 |
Ball Joint |
|
SKP : SK5331 |
Ball Joint |
|
SKP : SK5333 |
Ball Joint |
|
SKP : SK6701 |
Ball Joint |
|
ULTRA-POWER : K80566 |
Ball Joint |
|
DORMAN : BJ74305XL |
Ball Joint |
- Adjustable: No ;
- Attachment Type: Taper ;
- Ball Joint Assembly: Yes ;
- Ball Joint Installed: Yes ;
- Bearing Material: Polymer ;
- Bolts/Studs Included: Yes ;
- Bushing Included: No ;
- Bushings Included: No ;
- Castle Nut Included: Yes ;
- Color: Grey ;
- Cotter Pin Hole: Yes ;
- Cotter Pin Included: No ;
- Dust Boot Included: Yes ;
- Dust Boot Material: Rubber ;
- Grease Fitting Included: No ;
- Greaseable: No ;
- Height (MM): 85.03 ;
- Housing Press Fit Diameter: 45 mm ;
- Length (MM): 111 ;
- Material: Steel ;
- Maximum Outside Diameter (MM): 61 ;
- Mount Plate Included: No ;
- Mounting Bolts Included: No ;
- Mounting Hardware Included: Yes ;
- Mounting Hole Quantity: 1 ;
- Mounting Type: Bolt On ;
- Nuts Included: Yes ;
- Package Contents: 1 Ball Joint; 1 Castle Nut; 1 Cotter Pin; 2 Nuts; 1 Bolt ;
- Stud Taper Per Foot (IN): 2 ;
- Stud Tapered End 1 Diameter (mm): 27.2 ;
- Stud Tapered End 2 Diameter (mm): 22 ;
- Stud Thread Diameter (MM): 14 ;
- Stud Thread Length (MM): 35.5 ;
- Stud Thread Pitch (mm): 1.5 ;
- Stud Type: Taper ;
- Suspension Grade Type: Standard ;
- Tapered Stud: Yes ;
- Thread Pitch: M1.5 ;
- Type: Threaded ;
- Washers Included: No ;
- Width (MM): 59 ;
- Wrench Size (mm): 12 ;
|
DORMAN : BJ90405XL |
Ball Joint |
- Adjustable: No ;
- Attachment Type: Pinch ;
- Ball Joint Assembly: Yes ;
- Ball Joint Installed: Yes ;
- Bearing Material: Polymer ;
- Bolts/Studs Included: No ;
- Bushing Included: No ;
- Bushings Included: No ;
- Castle Nut Included: No ;
- Color: Grey ;
- Cotter Pin Hole: No ;
- Cotter Pin Included: No ;
- Dust Boot Included: Yes ;
- Dust Boot Material: Polychloroprene ;
- Grease Fitting Included: No ;
- Greaseable: No ;
- Height (MM): 85.03 ;
- Housing Press Fit Diameter: 45 mm ;
- Length (MM): 111 ;
- Material: Steel ;
- Maximum Outside Diameter (MM): 61 ;
- Mount Plate Included: No ;
- Mounting Bolts Included: No ;
- Mounting Hardware Included: Yes ;
- Mounting Hole Quantity: 3 ;
- Mounting Type: Bolt On ;
- Nuts Included: Yes ;
- Package Contents: 1 Ball Joint; 1 Nut; 1 Bolt ;
- Stud Taper Per Foot (IN): 2 ;
- Stud Tapered End 1 Diameter (mm): 27.2 ;
- Stud Tapered End 2 Diameter (mm): 22 ;
- Stud Thread Diameter (MM): 15.1 ;
- Stud Thread Length (MM): 35.5 ;
- Stud Thread Pitch (mm): 1.5 ;
- Stud Type: Pinch ;
- Suspension Grade Type: Premium ;
- Tapered Stud: Yes ;
- Thread Pitch: M1.5 ;
- Type: Threaded ;
- Washers Included: No ;
- Width (MM): 59 ;
- Wrench Size (mm): 12 ;
|
DORMAN : BJ90415XL |
Ball Joint |
- Adjustable: No ;
- Attachment Type: Pinch ;
- Ball Joint Assembly: Yes ;
- Ball Joint Installed: Yes ;
- Bearing Material: Polymer ;
- Bolts/Studs Included: Yes ;
- Bushing Included: No ;
- Bushings Included: No ;
- Castle Nut Included: No ;
- Color: Grey ;
- Cotter Pin Hole: No ;
- Cotter Pin Included: No ;
- Dust Boot Included: Yes ;
- Dust Boot Material: Polychloroprene ;
- Grease Fitting Included: No ;
- Greaseable: No ;
- Height (MM): 85.03 ;
- Housing Press Fit Diameter: 45 mm ;
- Length (MM): 111 ;
- Material: Steel ;
- Maximum Outside Diameter (MM): 61 ;
- Mount Plate Included: No ;
- Mounting Bolts Included: No ;
- Mounting Hardware Included: Yes ;
- Mounting Hole Quantity: 3 ;
- Mounting Type: Bolt On ;
- Nuts Included: Yes ;
- Package Contents: 1 Ball Joint; 4 Nuts; 4 Bolts ;
- Stud Taper Per Foot (IN): 2 ;
- Stud Tapered End 1 Diameter (mm): 27.2 ;
- Stud Tapered End 2 Diameter (mm): 22 ;
- Stud Thread Diameter (MM): 15 ;
- Stud Thread Length (MM): 35.5 ;
- Stud Thread Pitch (mm): 1.5 ;
- Stud Type: Pinch ;
- Suspension Grade Type: Premium ;
- Tapered Stud: Yes ;
- Thread Pitch: M1.5 ;
- Type: Threaded ;
- Washers Included: No ;
- Width (MM): 59 ;
- Wrench Size (mm): 12 ;
|
DORMAN : BJ92265XL |
Ball Joint |
- Adjustable: No ;
- Attachment Type: Taper ;
- Ball Joint Assembly: Yes ;
- Ball Joint Installed: Yes ;
- Bearing Material: Polymer ;
- Bolts/Studs Included: Yes ;
- Bushing Included: No ;
- Bushings Included: No ;
- Castle Nut Included: Yes ;
- Color: Grey ;
- Cotter Pin Hole: Yes ;
- Cotter Pin Included: No ;
- Dust Boot Included: Yes ;
- Dust Boot Material: Polychloroprene ;
- Grease Fitting Included: No ;
- Greaseable: No ;
- Height (MM): 85.03 ;
- Housing Press Fit Diameter: 45 mm ;
- Length (MM): 111 ;
- Material: Steel ;
- Maximum Outside Diameter (MM): 61 ;
- Mount Plate Included: No ;
- Mounting Bolts Included: No ;
- Mounting Hardware Included: Yes ;
- Mounting Hole Quantity: 3 ;
- Mounting Type: Bolt On ;
- Nuts Included: Yes ;
- Package Contents: 1 Ball Joint; 3 Bolts; 3 Nuts; 1 Castle Nut; 1 Cotter Pin ;
- Stud Taper Per Foot (IN): 2 ;
- Stud Tapered End 1 Diameter (mm): 27.2 ;
- Stud Tapered End 2 Diameter (mm): 22 ;
- Stud Thread Diameter (MM): 12 ;
- Stud Thread Length (MM): 35.5 ;
- Stud Thread Pitch (mm): 1.5 ;
- Stud Type: Taper ;
- Suspension Grade Type: Premium ;
- Tapered Stud: Yes ;
- Thread Pitch: 1.75 ;
- Type: Threaded ;
- Washers Included: No ;
- Width (MM): 59 ;
- Wrench Size (mm): 12 ;
|
MEVOTECH : MS50520 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Bearing Type: Sintered Metal ;
- Castle Nut Included: Yes ;
- Cotter Pin Included: Yes ;
- Dust Boot Included: Yes ;
- Grease Fitting Included: Yes ;
- Greaseable: Yes ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Bolt-in ;
- Pre-Greased: Yes ;
- Stud Type: Threaded ;
|
ACDELCO : 45D10711 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Castle Nut Included: No ;
- Cotter Pin Hole: No ;
- Dust Boot Included: Yes ;
- Greaseable: Yes ;
- Stud Type: Grooved ;
|
ULTRA-POWER : K80567 |
Ball Joint |
|
DORMAN : BJ55005XL |
Ball Joint |
- Adjustable: No ;
- Attachment Type: Taper ;
- Ball Joint Assembly: Yes ;
- Ball Joint Installed: Yes ;
- Bearing Material: Polymer ;
- Bolts/Studs Included: Yes ;
- Bushing Included: No ;
- Bushings Included: No ;
- Castle Nut Included: No ;
- Color: Grey ;
- Cotter Pin Hole: No ;
- Cotter Pin Included: No ;
- Dust Boot Included: Yes ;
- Dust Boot Material: Polychloroprene ;
- Grease Fitting Included: No ;
- Greaseable: No ;
- Height (MM): 85.03 ;
- Housing Press Fit Diameter: 45 mm ;
- Length (MM): 111 ;
- Material: Steel ;
- Maximum Outside Diameter (MM): 61 ;
- Mount Plate Included: No ;
- Mounting Bolts Included: No ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Bolt On ;
- Nuts Included: Yes ;
- Package Contents: 1 Ball Joint; 3 Nuts; 2 Bolts ;
- Stud Taper Per Foot (IN): 2 ;
- Stud Tapered End 1 Diameter (mm): 27.2 ;
- Stud Tapered End 2 Diameter (mm): 22 ;
- Stud Thread Diameter (MM): 12 ;
- Stud Thread Length (MM): 35.5 ;
- Stud Thread Pitch (mm): 1.5 ;
- Stud Type: Taper ;
- Suspension Grade Type: Premium ;
- Tapered Stud: Yes ;
- Thread Pitch: M1.25 ;
- Type: Threaded ;
- Washers Included: No ;
- Width (MM): 59 ;
- Wrench Size (mm): 12 ;
|
ULTRA-POWER : K80595 |
Ball Joint |
|
MEVOTECH : TXK5331 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Bearing Type: Sintered Metal ;
- Cotter Pin Included: Yes ;
- Dust Boot Included: Yes ;
- Grease Fitting Included: Yes ;
- Greaseable: Yes ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Bolt-in ;
- Pre-Greased: Yes ;
- Stud Type: Threaded ;
|
QUICK STEER : K500175 |
Ball Joint |
|
ULTRA-POWER : K6527 |
Ball Joint |
|
GM GENUINE : 88965333 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Castle Nut Included: Yes ;
- Cotter Pin Hole: Yes ;
- Dust Boot Included: Yes ;
- Greaseable: No ;
- Mounting Hole Quantity: 3 ;
- Stud Thread Diameter (IN): 0.47 ;
- Stud Type: Threaded ;
|
GM GENUINE : 92287353 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Mounting Type: Press In ;
|
GM GENUINE : 96535089 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Mounting Type: Bolt In ;
- Ball Joint Stud Length (IN): .787 ;
- Ball Joint Stud Type: Threaded ;
- Ball Joint Thread Diameter (in): .472 ;
- Grease Fitting Included: No ;
- Mount Hole Quantity: 2 ;
- Mounting Hardware Included: No ;
- Pre-Greased: Yes ;
|
GM GENUINE : 92246202 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Mounting Type: Press In ;
|
DELPHI : TC1619 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Bushings Included: No ;
- Castle Nut Included: Yes ;
- Color: Gray ;
- Cotter Pin Hole: Yes ;
- Cotter Pin Included: Yes ;
- Dust Boot: Yes ;
- Dust Boot Material: Choloroprene Rubber (CR) ;
- Height (IN): 3.346 ;
- Height (MM): 84.0 ;
- Material: Ball Material - Alloy Steel SAE 5140, Housing Material - Carbon Steel SAE 1040 ;
- Mount Plate Included: No ;
- Mounting Bolt Head Diameter (IN): 0.827 ;
- Mounting Bolt Head Diameter (MM): 21.0 ;
- Mounting Bolt Length (IN): 1.181 ;
- Mounting Bolt Length (MM): 30.0 ;
- Mounting Bolt Shank Diameter (MM): 12.0 ;
- Mounting Bolt Thread Length (MM): 27.5 ;
- Mounting Bolt Thread Pitch (MM): 1.75 ;
- Mounting Bolts Included: Yes ;
- Mounting Hardware Included: Yes ;
- Mounting Hole Quantity: 3 ;
- Mounting Type: Bolt On ;
- Nuts Included: Yes ;
- Position(s): Front Lower ;
- Stud Taper Per Foot (IN): 0.167 ;
- Stud Tapered End 1 Diameter (in): 0.638 ;
- Stud Tapered End 1 Diameter (mm): 16.2 ;
- Stud Tapered End 2 Diameter (in): 0.524 ;
- Stud Tapered End 2 Diameter (mm): 13.3 ;
- Stud Thread Diameter (MM): 12.0 ;
- Stud Thread Length (IN): 0.787 ;
- Stud Thread Pitch (mm): 1.5 ;
- Stud Type: Threaded ;
- Suspension Grade Type: Standard ;
- Tapered Stud: Yes ;
- Washers Included: Yes ;
- Width (MM): 97.0 ;
- Wrench Size (mm): 19.0 ;
|
DELPHI : TC1834 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Bushings Included: No ;
- Castle Nut Included: Yes ;
- Color: Gray ;
- Cotter Pin Hole: Yes ;
- Cotter Pin Included: Yes ;
- Dust Boot: Yes ;
- Dust Boot Material: Choloroprene Rubber (CR) ;
- Height (IN): 3.701 ;
- Height (MM): 95.0 ;
- Material: Ball Material - Alloy Steel SAE 5140, Housing Material - Carbon Steel SAE 1040 ;
- Maximum Outside Diameter (IN): 1.063 ;
- Maximum Outside Diameter (MM): 27.0 ;
- Mount Plate Included: No ;
- Mounting Bolt Head Diameter (IN): 0.827 ;
- Mounting Bolt Head Diameter (MM): 21.0 ;
- Mounting Bolt Length (IN): 1.181 ;
- Mounting Bolt Length (MM): 30.0 ;
- Mounting Bolt Shank Diameter (MM): 12.0 ;
- Mounting Bolt Thread Length (MM): 27.5 ;
- Mounting Bolt Thread Pitch (MM): 1.75 ;
- Mounting Bolts Included: Yes ;
- Mounting Hardware Included: Yes ;
- Mounting Hole Quantity: 3 ;
- Mounting Type: Bolt On ;
- Nuts Included: Yes ;
- Position(s): Front Lower ;
- Stud Taper Per Foot (IN): 0.167 ;
- Stud Tapered End 1 Diameter (in): 0.768 ;
- Stud Tapered End 1 Diameter (mm): 19.5 ;
- Stud Tapered End 2 Diameter (in): 0.591 ;
- Stud Tapered End 2 Diameter (mm): 15.0 ;
- Stud Thread Diameter (MM): 12.0 ;
- Stud Thread Length (IN): 0.866 ;
- Stud Thread Pitch (mm): 1.75 ;
- Stud Type: Threaded ;
- Suspension Grade Type: Standard ;
- Tapered Stud: Yes ;
- Washers Included: Yes ;
- Width (MM): 101.0 ;
- Wrench Size (mm): 19.0 ;
|
DELPHI : TC5369 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Bushings Included: No ;
- Castle Nut Included: Yes ;
- Color: Black ;
- Cotter Pin Hole: Yes ;
- Cotter Pin Included: Yes ;
- Dust Boot: Yes ;
- Dust Boot Material: Choloroprene Rubber (CR) ;
- Greasable: Yes ;
- Grease Fitting Included: Yes ;
- Height (IN): 3.819 ;
- Length (MM): 80 ;
- Material: Steel ;
- Mount Plate Included: No ;
- Mounting Bolt Head Diameter (IN): 0.748 ;
- Mounting Bolt Head Diameter (MM): 19.0 ;
- Mounting Bolt Length (IN): 1.772 ;
- Mounting Bolt Length (MM): 45.0 ;
- Mounting Bolt Shank Diameter (MM): 10.0 ;
- Mounting Bolt Thread Length (MM): 28.0 ;
- Mounting Bolt Thread Pitch (MM): 1.5 ;
- Mounting Bolts Included: Yes ;
- Mounting Hardware Included: Yes ;
- Mounting Hole Quantity: 3 ;
- Mounting Type: Bolt On ;
- Nuts Included: Yes ;
- Position(s): Front Lower ;
- Stud Taper Per Foot (IN): 0.167 ;
- Stud Tapered End 1 Diameter (in): 0.768 ;
- Stud Tapered End 1 Diameter (mm): 19.5 ;
- Stud Tapered End 2 Diameter (in): 0.6 ;
- Stud Tapered End 2 Diameter (mm): 15.25 ;
- Stud Thread Diameter (MM): 12.0 ;
- Stud Thread Length (IN): 0.866 ;
- Stud Thread Pitch (mm): 1.5 ;
- Stud Type: Threaded ;
- Suspension Grade Type: Standard ;
- Tapered Stud: Yes ;
- Washers Included: Yes ;
- Width (MM): 105.7 ;
- Wrench Size (mm): 17.0 ;
|
DELPHI : TC5580 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Bushings Included: No ;
- Castle Nut Included: No ;
- Color: Black ;
- Cotter Pin Hole: No ;
- Cotter Pin Included: No ;
- Distance Between Mounting Holes (MM): 39.1 ;
- Dust Boot: Yes ;
- Dust Boot Material: Choloroprene Rubber (CR) ;
- Greasable: No ;
- Grease Fitting Included: No ;
- Height (IN): 3.74 ;
- Height (MM): 95.0 ;
- Length (MM): 120 ;
- Material: Steel ;
- Mounting Hardware Included: No ;
- Mounting Hole Quantity: 3 ;
- Mounting Type: Bolt In ;
- Nuts Included: No ;
- Position(s): Front Lower ;
- Stud Thread Diameter (IN): 0.78 ;
- Stud Thread Diameter (MM): 19.9 ;
- Stud Thread Length (IN): 0.96 ;
- Stud Thread Length (MM): 24.5 ;
- Suspension Grade Type: Standard ;
- Type: Grooved ;
- Washers Included: No ;
- Width (MM): 74.9 ;
|
DELPHI : TC5894 |
Ball Joint |
- Adjustable: No ;
- Dust Boot: Yes ;
- Greasable: No ;
- Grease Fitting Included: No ;
- Mounting Hardware Included: Yes ;
- Position(s): Front Lower ;
- Stud Thread Diameter (IN): 0.785 ;
|
DELPHI : TC5895 |
Ball Joint |
- Adjustable: No ;
- Dust Boot: Yes ;
- Greasable: No ;
- Grease Fitting Included: No ;
- Mounting Hardware Included: Yes ;
- Position(s): Rear Lower ;
- Stud Thread Diameter (IN): 0.551 ;
|
DELPHI : TC5913 |
Ball Joint |
- Adjustable: No ;
- Dust Boot: Yes ;
- Greasable: Yes ;
- Grease Fitting Included: Yes ;
- Mounting Hardware Included: Yes ;
- Position(s): Front Lower ;
- Stud Thread Diameter (IN): 0.551 ;
|
CENTRIC : 61062013 |
Ball Joint |
- Adjustable: No ;
- Bushing Material: Poly ;
- Castle Nut Included: Yes ;
- Cotter Pin Hole: Yes ;
- Cotter Pin Included: Yes ;
- Dust Boot: Yes ;
- Greasable: No ;
- Grease Fitting Included: No ;
- Mount Plate Included: No ;
- Mounting Bolt Length: 30.2 MM ;
- Mounting Bolts Included: Yes ;
- Mounting Hardware Included: Yes ;
- Mounting Hole Quantity: 3 ;
- Mounting Type: Bolt-on ;
- Nuts Included: Yes ;
- Stud Tapered End 1 Diameter: 15.3 mm ;
- Stud Tapered End 2 Diameter: 19.5 mm ;
- Stud Type: Threaded ;
- Tapered Stud: Yes ;
- Washers Included: No ;
|
CENTRIC : 61062017 |
Ball Joint |
- Adjustable: No ;
- Bushing Material: Poly ;
- Castle Nut Included: Yes ;
- Cotter Pin Hole: Yes ;
- Cotter Pin Included: Yes ;
- Dust Boot: Yes ;
- Greasable: No ;
- Grease Fitting Included: No ;
- Mount Plate Included: No ;
- Mounting Bolt Length: 23.6 MM ;
- Mounting Bolts Included: Yes ;
- Mounting Hardware Included: Yes ;
- Mounting Hole Quantity: 3 ;
- Mounting Type: Bolt-on ;
- Nuts Included: Yes ;
- Stud Tapered End 1 Diameter: 15.05 mm ;
- Stud Thread Length: 17.5 mm ;
- Stud Type: Threaded ;
- Tapered Stud: Yes ;
- Washers Included: No ;
|
CENTRIC : 61062019 |
Ball Joint |
- Adjustable: No ;
- Bushing Material: Poly ;
- Castle Nut Included: No ;
- Cotter Pin Hole: No ;
- Cotter Pin Included: No ;
- Dust Boot: Yes ;
- Mount Plate Included: No ;
- Mounting Bolts Included: Yes ;
- Mounting Hardware Included: Yes ;
- Mounting Hole Quantity: 3 ;
- Mounting Type: Bolt-on ;
- Nuts Included: Yes ;
- Stud Tapered End 1 Diameter: 15.2 mm ;
- Stud Tapered End 2 Diameter: 19.95 mm ;
- Stud Type: Pinch Bolt ;
- Tapered Stud: No ;
- Washers Included: No ;
|
CENTRIC : 61062022 |
Ball Joint |
|
CENTRIC : 61066043 |
Ball Joint |
|
MEVOTECH : MS50584 |
Ball Joint |
- Adjustable: No ;
- Dust Boot Included: Yes ;
- Dust Boot Material: Rubber ;
- Mount Plate Included: Yes ;
- Mounting Hole Quantity: 3 ;
- Mounting Type: Bolt-in ;
- Nuts Included: Yes ;
- Pre-Greased: Yes ;
- Stud Type: Threaded ;
|