SRT生产的Connecting Rod Bearing-第三方配件-宜配网-专业汽配网

也可拖拽图片到此处自动识别，或在微信/QQ截图后点击此处后Ctrl+V

参考号	零件	参数
MAHLE / CLEVITE : CB1808P	Connecting Rod Bearing	2.1257: 2.1263 ; Min Shaft: Max Shaft ;
MAHLE / CLEVITE : CB1809A	Connecting Rod Bearing	ALSolid cast aluminum alloy bearings (material designation AL-1) or steel backed bearings with an aluminum alloy lining material designation AL-3, AL-4, AL-5, AL-6). Standard replacement material.: NNarrowed for greater crankshaft fillet clearance. ; ASteel backed lead free aluminum silicon alloy bearings without overlay. Standard replacement material.: MSteel backed bearings with a Micro-Babbitt lining (a very thin layer of lining which reduces the microscopic deflections that occur to a bearing when loaded and thus increases fatigue life). Solely intended for extreme high-horsepower applications. ; BSteel backed bearings with a conventional babbit lining.: PSteel backed bearings with an intermediate layer of copper-lead alloy and an electroplated lead-tin-copper overlay. Standard replacement material. ; CSteel backed bearings with a copper-lead lining.: RIndicates that the bearing can be resized to standard. When following a camshaft bearing, indicates that it has extra bore stock in the inside diameter. ; DBearing has dowel hole.: SIndicates a set number designation. ; GSteel backed bearings with a matrix of copper and an infiltrant of lead-tin babbitt. Precision undersizes are not resizable.: VHigh performance bearing with a lead-indium overlay (on main sets this indicates partial groove). Solely intended for extreme high-horsepower applications. ; HGHigh performance full annular grooved bearing. Perform the same as "A" and "P" bearings, but have the ability to carry more load.: XBearing has .001” more oil clearance than standard. ; HHigh performance bearing (on main sets this indicates partial groove). Perform the same as "A" and "P" bearings, but have the ability to carry more load.: VGHigh performance bearing with a lead-indium overlay and a full annular groove. Solely intended for extreme high-horsepower applications. ; HTHigh performance with indentless locating lug. “Full Bore” design. Perform the same as "A" and "P" bearings, but have the ability to carry more load.: XXBearing has .002” more oil clearance than standard. ; KTriArmor coating applied to the bearing surface, which offers extraordinary protection and lubricity. Enhanced wear characteristics increase bearing life in race engines and high performance street Engines.: WIndicates a part that is a thrust washer (may also be designated upper or lower). ;
MAHLE / CLEVITE : CB1808HN	Connecting Rod Bearing	2.1257: 2.1263 ; Min Shaft: Max Shaft ;
MAHLE / CLEVITE : CB1808HXN	Connecting Rod Bearing	2.1257: 2.1263 ; Min Shaft: Max Shaft ;
MAHLE / CLEVITE : CB1808A	Connecting Rod Bearing	2.1257: 2.1263 ; Min Shaft: Max Shaft ;

参考号

零件

参数

MAHLE / CLEVITE : CB1808P

Connecting Rod Bearing

2.1257: 2.1263 ;
Min Shaft: Max Shaft ;

MAHLE / CLEVITE : CB1809A

Connecting Rod Bearing

ALSolid cast aluminum alloy bearings (material designation AL-1) or steel backed bearings with an aluminum alloy lining material designation AL-3, AL-4, AL-5, AL-6). Standard replacement material.: NNarrowed for greater crankshaft fillet clearance. ;
ASteel backed lead free aluminum silicon alloy bearings without overlay. Standard replacement material.: MSteel backed bearings with a Micro-Babbitt lining (a very thin layer of lining which reduces the microscopic deflections that occur to a bearing when loaded and thus increases fatigue life). Solely intended for extreme high-horsepower applications. ;
BSteel backed bearings with a conventional babbit lining.: PSteel backed bearings with an intermediate layer of copper-lead alloy and an electroplated lead-tin-copper overlay. Standard replacement material. ;
CSteel backed bearings with a copper-lead lining.: RIndicates that the bearing can be resized to standard. When following a camshaft bearing, indicates that it has extra bore stock in the inside diameter. ;
DBearing has dowel hole.: SIndicates a set number designation. ;
GSteel backed bearings with a matrix of copper and an infiltrant of lead-tin babbitt. Precision undersizes are not resizable.: VHigh performance bearing with a lead-indium overlay (on main sets this indicates partial groove). Solely intended for extreme high-horsepower applications. ;
HGHigh performance full annular grooved bearing. Perform the same as "A" and "P" bearings, but have the ability to carry more load.: XBearing has .001” more oil clearance than standard. ;
HHigh performance bearing (on main sets this indicates partial groove). Perform the same as "A" and "P" bearings, but have the ability to carry more load.: VGHigh performance bearing with a lead-indium overlay and a full annular groove. Solely intended for extreme high-horsepower applications. ;
HTHigh performance with indentless locating lug. “Full Bore” design. Perform the same as "A" and "P" bearings, but have the ability to carry more load.: XXBearing has .002” more oil clearance than standard. ;
KTriArmor coating applied to the bearing surface, which offers extraordinary protection and lubricity. Enhanced wear characteristics increase bearing life in race engines and high performance street Engines.: WIndicates a part that is a thrust washer (may also be designated upper or lower). ;

MAHLE / CLEVITE : CB1808HN

Connecting Rod Bearing

2.1257: 2.1263 ;
Min Shaft: Max Shaft ;

MAHLE / CLEVITE : CB1808HXN

Connecting Rod Bearing

2.1257: 2.1263 ;
Min Shaft: Max Shaft ;

MAHLE / CLEVITE : CB1808A

Connecting Rod Bearing

2.1257: 2.1263 ;
Min Shaft: Max Shaft ;

新手指南

供应商服务

宜配服务

帮助

尺寸/参数

标注实例