| NATIONAL : 88187 |
Harmonic Balancer Repair Sleeve |
- Flanged Outside Diameter (MM): 55.960 ;
- Flanged Outside Diameter (in): 2.203 ;
- Installation Depth (IN): 1.000 ;
- Installation Depth (MM): 25.400 ;
- Material: Nickel Plated Formed Steel ;
- Shaft Diameter Minimum (IN): 1.872 ;
- Shaft Diameter Minimum (MM): 47.550 ;
- Shaft Maximum Diameter (IN): 1.878 ;
- Shaft Maximum Diameter (MM): 47.700 ;
- Width (IN): 0.688 ;
- Width (MM): 17.480 ;
- Width On Shaft (IN): 0.563 ;
- Width on Shaft (MM): 14.300 ;
|
| MAHLE / CLEVITE : A2261 |
Harmonic Balancer Repair Sleeve |
- Additional Package Contents: Contains Harmonic Balancer Repair Sleeve ;
- Inside Diameter: 1.871 inches ;
- Material: Nickel Plated Formed Steel ;
- Outside Diameter: 1.889 Inches ;
- Size: .015 inches thick ;
|
| BCA : NS88187 |
Harmonic Balancer Repair Sleeve |
- Flange Diameter (IN): 2.20 ;
- Flange Diameter (MM): 56.0 ;
- Housing Bore (IN): 2.203 ;
- Housing Bore (MM): 56 ;
- Inside Diameter (IN): 1.872 ;
- Inside Diameter (MM): 47.6 ;
- Installation Depth (IN): 1.00 ;
- Installation Depth (MM): 25.4 ;
- Seal Case Material: SAE 30304 ;
- Shaft Diameter Maximum (IN): 1.875 ;
- Shaft Diameter Maximum (MM): 47.6 ;
- Shaft Diameter Minimum (IN): 1.87 ;
- Shaft Diameter Minimum (MM): 47.6 ;
- Width (IN): 0.563 ;
- Width (MM): 17.5 ;
- Width On Shaft (IN): 0.56 ;
- Width on Shaft (MM): 14.3 ;
|
| WJB / INMOTION PARTS : WS88187 |
Harmonic Balancer Repair Sleeve |
- Installation Depth: 1.000in ;
- Material: Nickel Plated Formed Steel ;
- Shaft Diameter Minimum: 1.872in ;
- Shaft Maximum Diameter: 1.878in ;
- Width: 0.688in ;
- Width On Shaft: 0.563in ;
|
